One purpose:
PWJ-20 type microcomputer controlled mechanical type automobile stabilizer bar fatigue testing machine is mainly used in the endurance fatigue test of the vehicle stabilizer bar, and can be used to test the mechanical performance of the automobile stabilizer bar. The machine has no pollution, high efficiency, with a wide range of frequency modulation and experimental space, with appropriate assistive devices, different specifications of the vehicle stability rod fatigue test and performance test.
At the same time, the existing electromagnetic speed regulation motor is upgraded to the frequency conversion speed regulation motor, the precision and the degree of automation is improved significantly. Fatigue testing, performance testing on a machine to complete. To achieve a multi-purpose effect.
Two, mechanical type automobile stabilizer bar fatigue test machine technical indicators
1, maximum test force (push pull): 20kN
2, test number: 1
3, amplitude (swing arm stroke length): Max: + 120mm (low frequency) can be adjusted
4, test frequency: 1-4HZ
5, the swing rod can adjust the length: 500 ~ 1200mm can be adjusted (manual mode)
6, the fixed slide can be adjusted 150 ~ 500mm in length can be adjusted (manual)
7. The length of the arm of the stabilizer is between the length of the angle between the length and the length of the 0 ~ 200mm.
A length measuring device is provided with a length measuring device at the clamping position of the stabilizer bar and the two stage connecting rod (rod) to adjust the mounting position of the stabilizer bar.
8, test count counter capacity: 9 x 108
Three, mechanical type automobile stabilizer bar fatigue test machine technology index function:
1, set the number of test automatic stop;
2, the test piece fault automatic stop;
3, display: digital display or computer display test number, test frequency, test starting and ending time, etc..
4, power supply voltage: three-phase four wire system 380V, 50Hz
5, the performance test of the test part of the technical indicators are as follows
6, maximum test force (push pull): 20kN
Load effective value measurement range: 0.8-20kN
Load measurement accuracy: 1% (static state measurement)
7, test number: 1
8, the displacement of the pendulum arm: + 120mm
9, the swing rod can adjust the length: 500 ~ 1200mm can be adjusted (manual mode)
10, in the stability of the clamp and the two - level connecting rod (rod) with a length measuring device to accurately adjust the installation position of the stabilizer bar
11, the fixed slide can be adjusted 150 ~ 500mm in length can be adjusted (manual)
12. The length of the arm of the stabilizer is between the length of the angle between the length and the length of the 0 ~ 300mm.
13, function: according to the value of displacement detection, or according to the value of the displacement, etc.
14, display: digital display or computer display test force, test displacement, test speed, etc..
15, power supply voltage: three-phase four wire system 380V, 50Hz